欢迎访问青岛金长城建筑工程有限公司官网!
您的位置:首页 >> 新闻资讯 >> 行业动态

新闻资讯JinChangCheng

环氧耐磨地坪:的特点和施工准备工作和建设步骤,防静电地板

发布时间:2020-09-25   浏览:11

环氧是抗静电抗静电剂,压缩型地板漆,其由表面涂层获得的耐腐蚀性也环氧耐磨地坪不会抗静电静电的产生。防静电环氧地坪施工做控制温度和湿度,良好的人员管理处理器基层,需要准备的保护措施。第一步中的防静电潜在需要首先做的环氧耐磨地坪结构,其次是导电铜箔,防静电刷砂浆的铺设,正如我们在下面详细介绍。

环氧耐磨地坪首先,环氧1的防静电特性,无缝表面涂层,无尘,耐磨损性,透气性,耐酸,抗应力,易清洁性是好的。 2,厚度的结构的中间可以UNEVEN基面条件可以是局部平滑,以确保完全的表面具有良好的平整度,提高了实用性和美观度。 3,生产FloorElectricity,通过涂覆在地上,很快排除了生产进口防静电接地系统的过程中产生的静电,以避免静电的积聚静电的有效消除防静电地板的主要目的人体和造成伤害的产品或引起压力破裂。二,施工需要准备什么1,场景封闭施工现场和气候要求之前,防静电环氧地坪,不存在交叉作业,良好的施工照明。的空气的要求相对湿度<75%, above dew point temperature 3 ℃. 2, the moisture content of the base layer base layer should be less than 4%, PH value of less than 9.3, the construction personnel and construction management personnel need to have some experience in the construction, the main need skilled staff. Construction workers need to organize properly coordinated and reasonable division of labor, on-site command staff have a wealth of experience. 4, labor protection measures for the construction of the site need to pay attention to fire safety and electricity, construction workers should put on clothes, wearing gloves, good construction warrantyProtection work. 5, preparation machines and equipment to be ready construction of special equipment, such as mixers, vacuum cleaners, carts, drums, scraper, approved knives, etc., placed at the site, at any time to ensure desirable. Second, anti-static epoxy floor construction step 1, antistatic antistatic primer with a spatula full scraping floor primer; oil absorption amount larger portion will slightly dry whitened, antistatic primer coating should be supplemented . 2, after the laying of conductive copper foil according to design primers to be dried, measuring the resistance value of the floor, typically 10 × 104 ~ 105Ω, and at regular intervals (500 × 500㎝) affixed to a conductive foil, a mesh structure is formed TIAN, to achieve a rapid charge to the grounding conduction effect. After completion of the measurement PC27-1 autoranging type digital ohmmeter conductivity of the conductive reticulated copper mesh, is mounted grounding device, the grounding resistance is less than 10Ω; 3, anti-static scraping mortar first pass coated with anti-static, quartz sand after stirring evenly talc, antistatic epoxy into a mortar with a scraper blade over again, and then the partly defective holes for Dianbu; 4, anti-static scraping mortar second time with anti-static coating, quartz sand, after stirring for uniform talc, antistatic epoxy into a mortar with a scraper blade over again, and then the partly defective holes for Dianbu; 5, anti-static scraping putty in a first pass anti-static coating, a curing agent, talc after stirring for uniform powder, transferred into antistatic epoxy putty, scraping with a scraper over again, and then the partly defective holes for Dianbu; 6, anti-static sanding dust drying putty, the whole grinding machine with a grinding dust thoroughly eliminating dust and marks; 7, scraping putty second time with anti-static anti-static coating, a curing agent, even after stirring talc, antistatic tune into epoxy putty, scraping with a scraper over again, and then part of a Dianbu for defects such as holes, measured after curing the coating formed by PC27-1 autoranging type digital ohmmeter conductive surface, the average volume resistivity: 104 ~ 109Ω.
上一篇:南京固化剂地坪:物种保护和环氧地坪漆点
下一篇:pvc地坪销售:环氧地坪施工过程中做什么需要